Hi,
I've a UPS with 4 IEC sockets.
I seem to be a little confused with the setup arrangement.
The 1st step I've done is to connect the PC cable into the UPS.
The 2nd step I've done is to connect the UPS cable into a 6-way power board.
The 3rd step I've done is plug the Powerboard into the mains socket.
Also I've plugged into the Powerboard five other devices.
My question with this setup is how many devices do i have protected? The UPS works, i suspect that the only protected device is the PC.
Is it better to plug the UPS cable straight into the mains socket.
Your advice would be very much appreciated.
magna05
